02-01-2007 10:23 AM
I have a customer that has Ciscoworks installed. (Current modules installed are RME, Cisco View, Device Fault Manager, Common Services, Campus Manager)
Can the customer do config pushes to the VPN and PIX devices using what they have installed or do they need something else added to Ciscoworks to do this? Thanks
02-01-2007 11:54 AM
The RME piece of the application should handle this config mgmt.
Have a look at the supported devices list as well for minimum code requirements:
02-01-2007 07:03 PM
What you need is CiscoWorks VMS (VPN Management Solution) to manage security devices.
I don't think you can do it with CiscoWorks LMS as it is purely for Routers/Switches.
Cheers.
02-01-2007 07:16 PM
VMS (now CSM) does have additional feature to manage security devices, but RME does have config management capabilities for PIX and VPN devices.
02-01-2007 07:41 PM
thanks for your highlight. I didn't aware that RME support those devices.
Cheers!
02-02-2007 06:57 AM
How would I use RME to do this with the PIx's and vpn's? Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide