cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1879
Views
0
Helpful
2
Replies

Configure SNMP v3 user to have multiple views

In light of the recent hacking of SolarWinds Orion we are trying to modify our monitoring system to have the least privileges' to do it's job. I'm trying to create a new SNMP v3 user on our cisco routers that has access to multiple views. However I do not see an option to add more than one MIB to a view, more than one view to a group, or more than one group to a user. 

1 Accepted Solution

Accepted Solutions

I figured it out. you can device more than one MIB for each view but each needs to be their own statment. 

for example:
snmp-server view prtg sysUpTime included
snmp-server view prtg ciscoMgmt included
snmp-server view prtg ifEntry included

snmp-server group prtg-group v3 priv read prtg
will have access to all 3 views defined above. 

View solution in original post

2 Replies 2

balaji.bandi
Hall of Fame
Hall of Fame

You can have example guide : ( this should work most of the Cisco IOS Platforms)

 

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/snmp/configuration/xe-3se/3850/snmp-xe-3se-3850-book/nm-snmp-snmpv3.html

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

I figured it out. you can device more than one MIB for each view but each needs to be their own statment. 

for example:
snmp-server view prtg sysUpTime included
snmp-server view prtg ciscoMgmt included
snmp-server view prtg ifEntry included

snmp-server group prtg-group v3 priv read prtg
will have access to all 3 views defined above. 
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco