Hey there,
I'm configuring an access/console server.
I configured aliases for my devices.
cp-ext-s1 telnet 192.168.41.11 2011
cp-ext-s2 telnet 192.168.41.11 2012
cp-ext-r1 telnet 192.168.41.11 2013
cp-ext-r2 telnet 192.168.41.11 2014
But when I do a sh session, the host column is an ip address but I want this to be the device name.
I tried adding a few ip host commands:
ip host cp-dmz-s1 2010 192.168.41.11
ip host cp-ext-r1 2013 192.168.41.11
But that didn't help.
CP-CS1#sh ses
Conn Host Address Byte Idle Conn Name
1 192.168.41.11 192.168.41.11 153 36 192.168.41.11
2 192.168.41.11 192.168.41.11 155 33
* 3 192.168.41.11 192.168.41.11 181 8
CP-CS1#
I'm sure I'm overlooking something stupid.
