Resolved! ASA with LMS3.2
Hello,I am using LMS3.2, but it is not able to collect running config, and startup config from asa 5520.Please note LMS is able to collect all syslog from asa.Can you please advise?thank you
Hello,I am using LMS3.2, but it is not able to collect running config, and startup config from asa 5520.Please note LMS is able to collect all syslog from asa.Can you please advise?thank you
We're using a layer 3 routed access model. In our monitoring systems, we typically use ICMP to ping the access layer end of the /30 link. It's simple, it works, but I'm just wondering if anyone has any opinions on whether it is better to do a ping ...
I have installed lms 4.1 on a customer but could not find on the documentation how many IPM collectors can be run based on the device count license.I found only a scaling table on the Installation Guide but does not says if its tied with the device c...
Hi,We are planning to upgrade CORP Domain from Windows 2003 Active Directory Schema to Windows 2008 R2 Active Directory Schema. I wanted to know if the following applications which are installed on windows (domain member servers) are compatible with ...
Hello,Wish to find out if its possible for cwlms to monitor vpn traffic, in such a way that whenever a vpn connection or links goes down it sends an alert to to the various mails created for it. i know cwlms does great things but i dont yet know if i...
Does someone know if or what is the best way to do a acquistion on ip address on devices that appear to be dead until ping before LMS4.1 reports onn them. For example we run acquistion on a branch we do not see 172.20.12.51, howver we ping it from my...
Hi Friends,I have cisco WS-C4507R+E with (WS-X4748-RJ45V+E) for connecting IP Phone over the POE....Whenever I connect IP Phone to this switch on the module, the IP Phones are not getting power on and nothing is working..I have configured the POE on...
Hello,it is not possible to pool counters for SVI interfaces on this platform ?show int vlan 100 also does not show traffic.IOS version is 15(1).2EY
How can I setup an alert to let me know a BGP route has been updated in a routing table?For example, this route was updated almost 6 hours ago and I would have like to gotten an alert when it change or was added. Note BGP did not reset and has been g...
Hi all,I have installed LMS 3.2 with HUM 1.1 in one of our location. When I am generating HUM-CPU-Utilization report or Interface utilization report device host name are missing or not appearing completely In the graph. However it is reflecting prope...
Hello, CiscoWorkers!I really need assistance in configuration. I've installed LMS 3.2 few times, but still can't find any devices. Please help me out. Any help appreciated. Thank you in advance.MS Server 2003, I've swithces 3750, 4503, 4506, 4948. Th...
Hi,I would like to install the LMS 4.1 (EVAL-LMS-41), the evaluation one, and want to know what are the minimum and recommended requirements for a Windows machine.Thank you in advance.
all credintials seem to be correct.
Hi networkers,Our production LMS syslog server is having abnormal behaviour. The collector log shows warnings (please see attached file), and email notification did not work for quite some time. I had to restart both syslog processes for it to run ag...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-12-2024 10:58 AM | ||
07-11-2024 02:55 PM | ||
07-10-2024 01:26 AM | ||
06-25-2024 09:33 AM | ||
06-21-2024 11:13 AM |
User | Count |
---|---|
3 | |
2 | |
2 | |
2 | |
2 |