cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2418
Views
8
Helpful
32
Replies

Consolidate all "Management" access to 1 Network [ISR,FPR,SMB]

TheGoob
Level 4
Level 4

So this would seem like it should be pretty easy...

Across the 3 devices, I have created a "vlan 98"

ISR, vlan98/SVI 10.0.0.1

FPR,vlan98/SVI 10.0.0.2

SMB [SG350XG], vlan98 10.0.0.3.

 

Everything connects to SMB and so from my WiFi, 192.168.5.0, I can access SMB GUI 10.0.0.3 no problem. But I can not even get a ping from 10.0.0.1 [ISR] or 10.0.0.2 [FPR].

On ISR I have associated 0/1/7 to vlan98, verified Interface and SVI 'up'

On FPR I have associated 1/8 to vlan98, verified Interface and SVI 'up'.

On SMB I have associated 1/11 to vlan98, verified up ..

Maybe this is not how I am supposed to do it? I have IP ROUTING On the SMB.. Just not sure best way to implement a system where I can access all 3 Devices via my main network, 192.168.5.0

 

Also, for simplicity, each Interface on each device is all connecting to a simple L2 switch... Again not sure if this was correct. Really, I just want the 3 devices to be on the 10.0.0.x and accessible from 192.168.5.0

32 Replies 32

TheGoob
Level 4
Level 4
Gateway of last resort is 75.160.240.27 to network 0.0.0.0

S*    0.0.0.0/0 [1/0] via 75.160.240.27
                is directly connected, Dialer1
      10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C        10.0.0.0/24 is directly connected, Vlan9
L        10.0.0.1/32 is directly connected, Vlan9
      75.0.0.0/32 is subnetted, 1 subnets
C        75.160.240.27 is directly connected, Dialer1
      172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C        172.16.1.0/24 is directly connected, Vlan8
L        172.16.1.1/32 is directly connected, Vlan8
S     192.168.1.0/24 [1/0] via 172.16.1.2
S     192.168.2.0/24 [1/0] via 172.16.1.2
S     192.168.3.0/24 [1/0] via 172.16.1.2
S     192.168.4.0/24 [1/0] via 172.16.1.2
S     192.168.5.0/24 [1/0] via 172.16.1.2
S     192.168.6.0/24 [1/0] via 172.16.1.2
      192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.10.0/24 is directly connected, Vlan1
L        192.168.10.2/32 is directly connected, Vlan1
      207.108.121.0/32 is subnetted, 1 subnets
C        207.108.121.182 is directly connected, Dialer1

TheGoob
Level 4
Level 4

Alrighty, then. That was it. Man alive this was enough to make me wanna drink.. More.

 

Thank you so much to all

Soon, more posts on new stuff!

Glad we could help.

Regards, LG
*** Please Rate All Helpful Responses ***

Review Cisco Networking for a $25 gift card