11-18-2005 07:45 AM
Hey guys,
Need help with snmp configurations on the router or pix which will send cpu utilization messages to syslog server.
Thanks
11-18-2005 02:49 PM
SNMP and Syslog are independent protocols. Not sure which one you are looking for. These two links regarding monitor CPU and PIX via SNMP may be helpful to you:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a94.shtml
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a13.shtml
11-18-2005 06:53 PM
Yes, I want to get messages sent to the syslog server when the pix or router CPU reaches a threshold. This way I am alerted of heavy usage on the pix or router. thanks again for you help
11-21-2005 11:46 PM
Hi,
You may want to take a look at this link which is more relevant to your question- CPU Thresholding Notification.
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_white_paper09186a00801cd87d.shtml
Cheers,
Eric
11-22-2005 05:41 AM
Thanks a lot ericchan. This is exactly what I was looking for.
Scott
01-05-2009 10:10 PM
Hi Eric ,
I was checking your update i also have same requirement of CPU Thresholding Notification of my PIX Firewall 535 VER 6.3 but currently the document is not available on the given URL BY YOU ...Will you please provide me the correct one .
My mail is is shariq.qamar@airtel.in
Thanks in Advance
regards
Shariq
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide