06-11-2015 03:22 AM
Hi All,
Recently we have installed DCNM(.exe) ver 7.1.1 on client's vm and DCNM monitors 6 N5K devices status etc. However client found that the DCNM vm server CPU loading is very high and even always 100%. And there are 16 vcpu and 8G ram allocated to the vm. It still slow and 100%.
From the windows task, we can find one of java processor always occupies more CPU utilzation and RAM. We tried to reboot the vm and set the virtual memory.
Any suggestion? Try to upgrade to 7.1.2 or open a tac tase?
Regards,
Tira
Solved! Go to Solution.
06-11-2015 06:09 AM
Hi Tira,
This link is for postgres vacuuming which is a necessary maintenance activity that should be performed every 2 weeks, even when performance is good.
Also, an upgrade most likely will not help. Poor performance will be carried through after the upgrade.
Thanks,
Eric
06-11-2015 04:38 AM
HI Tira,
open the task manager on the server and click "view" >click "select column" and check the check box for PID (process Identifier ) and check proceed with your diagnosis.
above will help you with process is taking higu cpu , right now you are seeing java.exe only not the actual process name.
Thanks-
Afroz
***Ratings Encourages Contributors****
06-11-2015 06:09 AM
Hi Tira,
This link is for postgres vacuuming which is a necessary maintenance activity that should be performed every 2 weeks, even when performance is good.
Also, an upgrade most likely will not help. Poor performance will be carried through after the upgrade.
Thanks,
Eric
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide