12-28-2010 06:41 AM
Hi,
I have installed the new version lms 4.0 (Windows 2008 - no R2 ) and I have a big problem regarding device discovery with this version
The devices are prepared for SNMPv2c and I start the discovery over the module CDP with seed devices and the right SNMP settings.
The devices are reachable but I can't find the new devices in the DCR.
In the status display I can see only Devices in the "Devices are updated in DCR" counter. Many devices are displayed with "localhost".
I use a public DNS Server for internet access only but I adjusted the lmshosts file on the local host for local use.
What can be the problem?
Many thanks
12-29-2010 04:18 PM
1. What kind of seed device are you using?
2. Did you verify if the snmp read/write credentials are correct?
3. Are you able to ping and snmpwalk to the device from the LMS server?
4. Go to Admin --> System --> Debug Settings --> Discovery Logging Configuration --> and select the follow modules:
5. Select Apply and re-run discovery job.
6. After completion, get the following logs:
08-23-2012 07:51 AM
I had modified the Windows Hosts file and then worked the Discovery
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide