DFM

[harris.h]

Since upgrading to latest DFM (Common Services)

I have lost contact with Domain.

when trying to attach to domain, getting message

"Cannot attach to Domain!

"Domain xxxx not attached to broker!"

ANY IDEAS PLEASE.

[steve.busby]

It's likely that for some reason the daemon manager died.

1) Please try to run this command on your server's CLI:

%NMSROOT%\CSCOpx\objects\smarts\bin\brcontrol

See, if the DFM server is registered fine with the broker and is up and running.

2) Next try to do "pdshow DfmServer" and "pdshow DfmBroker" and see if both are up and running (both commands are case sensitive).

3) Also, try to stop/re-start the CW2K daemon

net stop crmdmgtd

net start crmdmgtd

Also, you can try renaming the dfm.rps, because if that is corrupt, then the dfm server will not be able to start up. You must stop/restart the CW2K

server after renaming that file.

HTH

Steve

[harris.h]

Thanks very much, it looked like a corrupt .rps file.

Much appreciated.

[e-macias]

What IDU are you running?

Within Server configuration, Administration, process management try stopping DFMServer then re-starting DFMServer wait 5 minutes Then try re-connecting.