cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1107
Views
0
Helpful
2
Replies

EEM: SNMP Event Detector not available

ddmikeollington
Level 1
Level 1

Hello,

In 12.4(24)T4, I don't seem to have the SNMP detector in Advanced Security; however, it is present in Advanced IP Services.

Is this a known pre-requisite?  I can't seem to find any documentation or guidance from Feature Navigator that this should be the case.

Adv Sec (3845):

(config-applet)#event ?

  application  Application specific event

  cli          CLI event

  config       Configuration policy event

  counter      Counter event

  env          Environmental event

  interface    Interface event

  ioswdsysmon  IOS WDSysMon event

  ipsla        IPSLA Event

  nf           NF Event

  none         Manually run policy event

  oir          OIR event

  resource     Resource event

  rf           Redundancy Facility event

  routing      Routing event

  rpc          Remote Procedure Call event

  syslog       Syslog event

  tag          event tag identifier

  timer        Timer event

  track        Tracking object event

Adv IP Serv (2811):

(config-applet)#event ?

  application  Application specific event

  cli          CLI event

  counter      Counter event

  interface    Interface event

  ioswdsysmon  IOS WDSysMon event

  none         Manually run policy event

  oir          OIR event

  snmp         SNMP event

  syslog       Syslog event

  timer        Timer event

Cheers,

Mike

1 Accepted Solution

Accepted Solutions

Joe Clarke
Cisco Employee
Cisco Employee

This is bug CSCtj01916.  The SNMP ED should have been present in all images.

View solution in original post

2 Replies 2

Joe Clarke
Cisco Employee
Cisco Employee

This is bug CSCtj01916.  The SNMP ED should have been present in all images.

Thanks, I'll look at the fixed versions and see if they fit on the router.

Cheers,

Mike

Review Cisco Networking for a $25 gift card