EIGRP session between two L3 switches, one with vrf.

[netteam]

I need to establish an EIGRP session between two L3 switches, one with three VRF and the second with just vlan interfaces.

I need the second switch can see all the ips on the second switch (the one with VRF).

[balaji.bandi]

As long as on the switch SVI Layer 3 have right config and other side VRF with right tag vlan - they should able to form the peers.

if you want to other VRF need to know the routes come from Switch - then you need leak to global vrf and learn from other VRF

below exmaple give you some direction :

https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200158-Configure-Route-Leaking-between-Global-a.html

https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/216541-vrf-configuration-examples-on-ios-xe.html