12-13-2013 01:22 AM
HI,
Using Cisco Network Assistant... Can I find out the IP of a host which is connected to port 6 in my Catalyst 2960-24TC...
Many thanks in advance...
12-13-2013 01:33 AM
Try this:
conf t
ip device tracking
interface range g0/1 - 24
ip device tracking max 10
end
wr
-- Wait for 15 seconds --
Command: sh ip device tracking
or if you know what interface, "sh ip device tracking interface
Please don't forget to rate our useful posts. Thanks.
12-13-2013 02:11 AM
adding to Leo...
There is really no easy way to discover the IP address of the device connected to a port.
1. If you can get the MAC address of the device by using the 'show mac-address-table' command. Once you have these, you can do:
- if the switch is a L3 switch, issue the command 'sh ip arp'or '"show ip arp | include
2. You can also download a freeware tool, ccgetmacaddress, with this tool you can get the IP to MAC or MAC to IP.
Hope it helps.
Regards
12-13-2013 04:01 PM
There is really no easy way to discover the IP address of the device connected to a port.
Sandeep,
Try the "ip device tracking" feature. It'll pick up the IP addresses very easily, including 169.X.Y.Z.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide