Firepower1140 local interfaces communication

[Equal]

I have a firepower 1140 with outside, inside and dmz zones and interfaces. inside and dmz are all NATed to the Outside interface and access control configured so that hosts from inside(192.168.22.0/24) and dmz(192.168.94.0/24) can access the Outside(internet) and its working. However, hosts from inside and dmz cannot communicate with each other despite an allow policy being configured for each. how can i rectify this ?

[balaji.bandi]

The ACP rule required To and From source.

you can check the Logs what is dropping ? also check the routing requirement.

[Equal]

Policies configured

[Equal]

NATed between DMZ and Inside and now i can host in DMZ can communicate with hosts in Inside. i hope this is the way to do it

[MHM Cisco World]

This issue is solved ?