How can I check the status of the ASA 5510?

[chickengood]

Hello, I hope you understand my English.

I'd like to check the power condition, temperature, and fan condition of ASA 5510 8.2 (1).

So I searched for the command, but I couldn't find the appropriate.

1. Show Environment

-> Version 8.2 (1) does not have such a command.

-> Version 8.1 (1), 8.4 (2), 8.4.4 (1), 8.6 (1), 9.7 (1), 9.13 (1) have these commands.

2. Technical Support | Begging Show Module

-> Version 8.2 (1) does not have such a command.

If anyone knows about 5510, answer my question.

Thank you. ^

[balaji.bandi · Accepted solution]

Thats seems to be odd....only particular version do not have that command.

Since its old code do not have on hand to test for you

Can you post what error you get when you do show environ"

can you post  "show version"

as per the command syntax it is available for 8.2.X  

https://www.cisco.com/c/en/us/td/docs/security/asa/asa82/command/reference/cmd_ref/s3.html#wp1479191

[chickengood]

I'm sorry for the late reply.
I reread the command by referring to the link you sent me.

< Result : show env >

ASA5510# show en?
ERROR: % Unrecognized command

< Result : show version >

ASA5510# show version
Cisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.2(5)

...

Hardware: ASA5510, 256 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB

...

Please understand that you cannot show all the show version results for security reasons.

I'll be looking forward to your reply.
Thank you^^!