Hi all, Is there any way to write a script for Cisco switches to pull the CPU and Memery utilization . kindly help me if any ideas
Hi all, Is there any way to write a script for Cisco switches to pull the CPU and Memery utilization . kindly help me if any ideas
So what I'm trying to do is ultimately demonstrate to myself that OSPF will prefer a path which uses gigabit interfaces over those which use fastethernet interfaces [EDIT: WELL IT WON'T BOTH GET A COST OF 1 AND I COMPLETELY UNDERSTAD WHY]. I'm facing...
Hey guys, I'm not really a switching and routing expert, and I've been combing the internet looking for answers to what I suspect would be a simple problem for people who do this regularly, but I've had no luck so far. I'm dealing with a couple of is...
Hi Experts, i have switch with Model number is N9K-C9372TX-E & NXOS: version 7.0(3)I5(2). May i know the Command to implement the ethernet port speed limit to 25 Mbps on ingress to port or Egress out in the switch? thanks.
Hello Team,we have Cisco 9200-48 P series and we are having trouble with avaya IP phones. These IP phones are unable to get the IP address from DHCP server, but the same avaya phone is working fine on Cisco 2960 series switches.Please suggest. Also p...
Hello! I have a Cisco Prime Infra 3.1.0.0.132 with all updates installed. After restarting the ncs has not started. If I try to start manually, I see: setup of pnp failed please see the /var/KickStart/install/setup.log FATAL ERROR: Could not start d...
I'm testing using Prime Infrastructure 3.5 to push out a new IOS to some Cat3850 switches. I have a Linux VM running SCP server acting as the intermediary. The job starts and I see the IOS file start to copy to the Linux SCP folder. Then job fails an...
Hi everybody, i'm configuring remote office router, IPSec over MPLS connection, and ntp can't sync with ntp server. RMToff#sh ntp associations detail10.32.1.11 configured, authenticated, insane, invalid, unsynced, stratum 16ref ID 0.0.0.0, time 00000...
Hello, and thanks all for help. My question is can i copy configuration from 3750x to 9k by any tools like ansible or python, not by hands.Software on 3750x "C3750E Software (C3750E-UNIVERSALK9NPE-M), Version 15.0(2)SE1"Software on 9300 "Switch Soft...
HI im learning ccent from the cisco booki cant understand what the differen betweent HDLC to eoMPLS /MPLSif someone can explain this and if someone can explain to me what they do (i know what they do but perfectly) just so i will understand this 100%...
I wondering what I need to do when I connect to ssh from another network, for example if I have IP 10.10.10.1 and if I try to connect from 192.168.1.15 or 32.25.2.1. Beside the ssh config, do I need to setup a access-list do you have to be in the s...
I have added my switch 9404R into Prime and manage to find SYSOIDS over there. May I know is there any CLI command I could check directly inside switch rather than via Prime? Thanks in advance!
So I'm not sure if this involves a nuance in Packet Tracer or if there's something I'm doing wrong -- one thing is for certain, though I don't yet totally understand the network command although I will have a question on that later. I want the neighb...
Can someone have a review if this is going to work or not? I want the EEM script to kick in once the router can no longer ping the IP address. ip sla 11 icmp-echo 8.8.8.8 frequency 15 ip sla schedule 11 life forever start now ip sla enable reaction...
On most of my weekends i have to go stay in a small village in france where there is no dsl or fiber line conection possible (the village is just to small not really interesting for the isp's)Bit I managed to put a Lte advanced antenna to catch some ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-16-2024 07:00 AM | ||
08-16-2024 06:26 AM | ||
08-13-2024 03:41 PM | ||
08-04-2024 12:47 AM | ||
07-30-2024 11:36 PM |
User | Count |
---|---|
4 | |
3 | |
2 | |
1 | |
1 |