02-11-2024 06:56 AM
Hi dears in cisco routers or L3 swiches Have any tools in CLi that see live traffic ips by tx or rx of ips
Recoomand solution used netflow or sflow by flow collector
Some vendor like mikroitk have torch tools for do this in inteface or vlans
Have any suggest ?
Solved! Go to Solution.
02-12-2024 12:59 AM
Hello,
the command:
show ip traffic interface <interface_name>
is probably the closest you get without using Netflow, SPAN, or any third party tools...
02-11-2024 09:21 AM
IPS means IP address ? or IPS (Intrusion Prevention System) ?
You can use tool to monitor session or span the port to look - some devices do support NBAR / NetFlow and Sflow you mentioned.
Its all device capabilities, Higher end product do support different features in nexus to capture the traffic.
02-11-2024 12:35 PM
Hi ip address means For standalone Switch How Can do this?
I Donnot have any Flow collecotor
For a few second I need on nexus L3 port ip addresses and TX RX traffic
02-12-2024 12:40 AM
For a few second I need on nexus L3 port ip addresses and TX RX traffic
what nexus model and what nexus code ? - check below guide to capture
02-13-2024 12:10 AM
Nexus does not support that command as per i know, that command is ok on Enterprise switches.
02-12-2024 12:59 AM
Hello,
the command:
show ip traffic interface <interface_name>
is probably the closest you get without using Netflow, SPAN, or any third party tools...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide