How to add devices in LMS3.2?

[ericohermoso]

Hello,

This is my first time to install LMS3.2. I successfully installed the software but I don't know what is the next procedure and I don't know how to add devices. Please, How can I add devices to the LMS.

thank you,

[Leo Laohoo]

Go to Function > under Common Services > Device and Credentials > Device Management.

You can enter devices one-by-one or do bulk transfer (CSV file or text file).

[ericohermoso]

Hello,

Is there any configuration needed to the router/switches like snmp?

thank you

[Leo Laohoo]

Make sure your SNMP community string are all the same.  Also, if you have the default "public" and "private", for security sake, please change it.

[mkareemashraf]

Hai,

You need to assign SNMP comunity string on routers and swiches which your going to addd in LMS 3.2.

Be care with Read only and read write community string .

Read only to only fetch config, view device details.

Read write to change configuration on router through LMS.

regards,

M.K

[ericohermoso]

Hello,

Do I need to configure the username, password and protocols to discover the devices?

thank you