cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1018
Views
0
Helpful
0
Replies
Eric R. Jones
Participant

How to effectively use Cisco Prime 3.9 Compliance Profiles and Policies

I have installed Cisco Prime Infrastructure 3.9 and have the Compliance services running.

I have configured it to check on our configuration for logging host.

I have 3 types of switches, 3750, 3850 and 9300s.

When I run the check it finds 110 devices.

11 of the 110 are 9300's but it shows the severity as "ignore".

33 of the 110 are 3850's that show the "Major" severity which I configured to appear when an incorrect config is detected.

66 of the 110 are 9300's that show success.

I selected "IOS-XE" under platform selection to eliminate the 3750's.

I checked each device and compared the configurations and they match.

The logging host configuration is the same across all of them because they were deployed using Prime so no fat fingering.

Anyone with experience on getting the compliance services to work?

We'll be rid of the 3750 and 3850's over the next few months and only have 9300's and 6500's to deal with but that doesn't seem to matter. 

 

ej

0 REPLIES 0