Icmp Jitter collector configuration with Cisco LMS

[aryarahul]

Hi,

I am trying to collect jitter information of cisco Routers which are added in Cisco LMS

I have configured collector icmp jitter for them but somehow no stats are visible in lms and its says in IPM that u have no jitter collectors configured.

Do i need to enable anything on the Router as well to export stats to LMS ?

Thanks

[AFROJ AHMAD]

LMS 3.1 is very old.

I would suggest you to upgarde the LMS to 3.2.1 as there were few known issue in LMS 3.1

Thanks-

Afroz

***Ratings Encourages Contributors **

[aryarahul]

So ICMP Jitter Collectors wont work with 3.1 ?

[AFROJ AHMAD]

HI ,

You are running a version which already end of support.

Atleast  upgarde it to 3.2.1 and which was most stable version of LMS with a lot of enhancment with respect to IPM

---

in the meantime check the below output and see if you are able to see the result of the operations in it:

show ip sla statistics

Thanks-

Afroz

***Ratings Encourages Contributors ***

[AFROJ AHMAD]

One quick thing :

you are using SNMP v2 or SNMPv3 on your devices ?

***IMP >> you need to have  SNMP RW credentials added in LMS for IPSLA to work for any device.

Thanks-

Afroz

**Ratings Encourages Contributors ***

[aryarahul]

Hi,

I am using snmp V2 with both RW and WR credentials , still not working though