dears, when adding or deleteing a user on router CLI i receive the below warning:warning: unable to update SNMP users databasereason: generic error we are using SNMPv2 please advise.thank you.
I figured out how to create a custom SNMP template and I figured out how to deploy the custom template to a device. However, I have no idea how to examine the data it's supposed to be collecting (if it is actually collecting it) through the UI. Is ...
are there any pro's / con's to consider (as we go from prime lms 4.2 to prime infrastructure) in installing prime infrastructure on the same vm as our lms 4.2 server?
There was a discussion of using the router to look at the trace capture from the router, I downloaded the EPC header, but don't know to install. Is there any documentation on how to install the script file onto the ASR router? Thank youOsh
Hi, when will the support be available for windows server 2012?tried installing LMS 4.2 on windows server 2012 and had the following error as shown in the attachement. From the LSM installation prerequiste it seems like only Windows Server 2008 and R...
i am wanting a script that will generate a syslog message for both tx/rx transciever power warnings and alarms. I would like to use the command "show inter transceiver" which generates output similiar to the output below (also see the attached outpu...
I had a query with respect to eem tcl scripts.I have to invoke a script when a customized syslog is generated, which is not working Test1.tcl::cisco::eem::event_register_none maxrun 100namespace import ::cisco::eem::*namespace import ::cisco::lib::* ...
Hi all, the customer uses LMS 4.2.4. He has the latest package for Cisco View (Cat2960.cv50.v18-0.zip) installed. When he try to display Cat2960X with 48 ports the Cisco View shows nothing. Cisco View shows the Catalyst 2960X-24 without any problems...
I'm trying to get my 2960s to detect the connection of an Access Point and then switch the port from a 802.1.X authenticated port to a trunk.I have this working to the point where after MAB auth my ISE will specify the Macro to run to reconfigure the...
We are configuring a number of Nexus 5548P switches, in a test environment, and have set up call-home to deliver alerts to our local exchange, which we have working, however the source IP address for the call-home traffic is the that of the outgoing ...
Hi All, I have just installed Cisco DCNM 6.2. I have run a discovery using SNMP v1 my core switch which is a 3750G stack. DCNM discovers all my switches but does not support the 2960 and 3750 switches. The only switches I can select to manage and are...
Hi all, I'm facing some problem using the topology function in LMs 3.2.I able to discover all my devices .however, some links are not shown in the topology service and some off the devices discovered under "unconnected device".i attached 2 screenshot...
Dear people, we are next (one more month) to upgrade our old LMS 2.6 but something occurred.The system has been running smootly during several years, but ...First the the ssl certificate expired (and some processes stopped) , so that we successfull...
We have a cisco Prime Infrastructure 2.0 managing switches, routers and AP.By default, when a port of a switch goes down, the cisco Prime Infrastructre generates a Critical Alarm for that. (this is a problem, because every phone of laptop disconnecti...
Good day!I'm trying to move list of device from LMS 4.0.0 to Prime Inf 2.0. Procedure:1) Make a backup of LMS 4.0 2) On the VM deployed LMS 4.2 3) Copy the backup to LMS 4.2 4) Patched LMS 4.2 to 4.2.2 and then to 4.2.4 5) With LMS 4.2.4 trying to co...
