05-02-2012 05:41 AM
Hello!
I want to upgrade a Catalyst 3560-48PS to the last IOS.
I get an errormessage stating that there is insufficient space in flash: I have deleted all files in flash - but I still get the same error message. According to the documentation there should be enough memory. Messages are pasted below.
What am I missing?
Regards,
Torleif
Switch#dir
Directory of flash:/
No files in directory
15998976 bytes total (15997952 bytes free)
Switch#archive download-sw tftp://192.168.9.13/c3560-ipservicesk9-tar.122-55.SE.tar
Loading c3560-ipservicesk9-tar.122-55.SE.tar from 192.168.9.13 (via Vlan9): !!!!!!!
[OK - 15964160 bytes]
Loading c3560-ipservicesk9-tar.122-55.SE.tar from 192.168.9.13 (via Vlan9): !!!!!!!!
examining image...
extracting info (109 bytes)
extracting c3560-ipservicesk9-mz.122-55.SE/info (519 bytes)
extracting info (109 bytes)
System Type: 0x00000000
Ios Image File Size: 0x00C19A00
Total Image File Size: 0x00F37200
Minimum Dram required: 0x08000000
Image Suffix: ipservicesk9-122-55.SE
Image Directory: c3560-ipservicesk9-mz.122-55.SE
Image Name: c3560-ipservicesk9-mz.122-55.SE.bin
Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
Error: There is insufficient space in flash: to install the required
Error: image. Clean up some old images, and try again.
Switch#
Solved! Go to Solution.
05-04-2012 02:18 AM
Thanks for the ratings. Did it work?
05-04-2012 06:14 AM
12.2(50) was too big.
12.2.(46) installed fine.
Torleif
05-04-2012 05:57 PM
Ok. Thanks.
05-05-2012 10:27 PM
Got another option for you ... If you don't NEED to use the HTML subdirectory you can just push the BIN file. 12.2(55)SE5 is approximately 12 Mb so it should fit.
05-24-2012 11:28 PM
Worked fine!
First time I tried I used the archive command - which of corse did not work with bin files. When I tried with copy tftp it worked fine!
Thank you!
09-11-2012 06:56 PM
Hi
Just to add my 2 cents. I believe the tar file you were trying to use for the upgrade needs 32mb of flash because it contains the IOS binary and the web based management files, you can use the the archive download-sw with the "imageonly" and "overwrite" options to archive the same result as the copy of the binary file alone.
archive download-sw /imageonly /overwrite source-url
Also at this time 12.2(55)SE6 is available for download, this version requires only 16MB of flash in most of the 3560 (non-E / non-X).
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide