cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3070
Views
54
Helpful
24
Replies

LMS 4.0 issues

gunarserdmanis
Beginner
Beginner

Hello,

I installed LMS 4.0 evaluation version on a test server and encountered the following issues:

1. Installation
During installation several Installshield errors appeared. Nevertheless installation finished successfuly.

2. IPSLA
I am unable to create an IP SLA collector. No devices are shown under Source devices although there is a cat3750 switch added to the LMS.

3. DFM
Several menus associated with DFM do not open. Instead error messages appear. The menus include:
Monitor> Fault Settings> Setup
Monitor> Threshold Settings> Fault
Reports> Fault and Event> History

4. VRF Lite
Errors are returned when accessing the following menus:
Admin> Network> Purge Settings> VRF Lite Purge Settings
Admin> Collection Settings> VRF Lite> VRF Lite Collector Schedule

5. UT
Errors are returned when accessing the menus:
Inventory> User Tracking Settings> Acquisition Summary
Admin> Collection Settings> User Tracking> Acquisitions Info
Admin> Collection Settings> User Tracking> Dynamic Update Process Status

6. RME
Inventory> Dashboards> Device Status: Collection summary - displays error:
Sorry, an error occurred

7. Software Management
Flash size is reported incorrectly. Instead of 16MB it appears as 15MB. Because of this it is impossible to upgrade IOS using LMS.


Did anyone experience similar issues and find a solution?

Thank you in advance,
Gunars

2 Accepted Solutions

Accepted Solutions

Assem Fares
Cisco Employee
Cisco Employee

New bug CSCtk63285 filed to track the issue. A patch for this bug is available by calling the TAC.

View solution in original post

24 Replies 24

Marvin Rhoads
VIP Community Legend VIP Community Legend
VIP Community Legend