cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1440
Views
0
Helpful
15
Replies

LMS3.1 DFM Error

jeeyishyuan
Level 1
Level 1

Hi Experts,

I have encountered error on DFM 3.1.3 on LMS 3.1. The error is as below:

Error in getting instance of TreeGenerator class com.cisco.nm.trx.kdm.utils.DcrGroupSelectorTreeGenerator Root Cause:com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!

Please advise.

Thanks & Regards,

Yi Shyuan

1 Accepted Solution

Accepted Solutions

As I suspected, tcp/9002 is in use. The process is seagent.exe. If you kill this process (i.e. disable the associated service), then restart CiscoWorks Daemon Manager, DFM should start working.

View solution in original post

15 Replies 15

Joe Clarke
Cisco Employee
Cisco Employee

Post the output of the pdshow command the the DFMOGSServer.log and DFMOGSClient.log.

a

Hi Joe,

Here's the log file. DFMOGSClient.log can't be posted as it is empty.

Pdshow command doesn't seem to work to show the log file.

Please advise.

You need to run the command pdshow from a DOS prompt, then post the output. That will be key in identifying the problem.

Hi Joe,

Here's the pdshow output.

It looks as though something may be using tcp/9002 on this server. Post the output of netstat -a -n -o -b and the NMSROOT/objects/smarts/local/logs/brstart.log.

Hi Joe,

Here's the output of netstat -a -n -o -b and the NMSROOT/objects/smarts/local/logs/brstart.log.

As I suspected, tcp/9002 is in use. The process is seagent.exe. If you kill this process (i.e. disable the associated service), then restart CiscoWorks Daemon Manager, DFM should start working.

Hi Joe,

If this service can't be killed, is there any way to fix this problem?

Thanks and Regards,

Yi Shyuan

You will have to reconfigure that process to use a difference TCP port. TCP port 9002 MUST be available for DFM.