cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1519
Views
0
Helpful
2
Replies
ccg_admin
Beginner

Login to switch via ssh

Hi, i have 2960 Catalyst with LANLITE. And i cannot set "transport input ssh", it allows only telnet. I'm wondering if cisco lanlite switches have ssh input in newer releases of IOS or there is no way to make ssh input on this switch?

Here's show ver output (i removed all serial and part numbers):

S14#sh ver

Cisco IOS Software, C2960 Software (C2960-LANLITE-M), Version 12.2(37)EY, RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Thu 28-Jun-07 18:07 by antonino

Image text-base: 0x00003000, data-base: 0x00D00000

ROM: Bootstrap program is C2960 boot loader

BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(37r)EY, RELEASE SOFTWARE (fc1)

S14 uptime is 17 weeks, 1 day, 47 minutes

System returned to ROM by power-on

System restarted at 10:49:35 UA Thu Apr 28 2011

System image file is "flash:c2960-lanlite-mz.122-37.EY/c2960-lanlite-mz.122-37.EY.bin"

cisco WS-C2960-48TC-S (PowerPC405) processor (revision A0) with 61440K/4088K bytes of memory.

Processor board ID

Last reset from power-on

2 Virtual Ethernet interfaces

48 FastEthernet interfaces

2 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

64K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address       : 00:1F:C9:7E:A6:00

Motherboard assembly number     :

Power supply part number        :

Motherboard serial number       :

Power supply serial number      :

Model revision number           : A0

Motherboard revision number     : A0

Model number                    : WS-C2960-48TC-S

System serial number            :

Top Assembly Part Number        :

Top Assembly Revision Number    : A0

Version ID                      : V01


2 REPLIES 2
Pradeep Vaka
Cisco Employee

Hi Alexander,

The image you installed is without crypto

c2960-lanlite-mz.122-37.EY.bin

You need to install the software with crypto to get ssh

c2960-lanlitek9-mz.122-37.EY.bin

Hope this helps.

Regards

Pradeep

Thanks a lot!

Content for Community-Ad