10-06-2020 03:37 AM
hello every one
i have Cisco (C9300-24T) switch and i managing it from GUI web interface.
Previously i can see the full items like dashboard, monitoring, administration, Port Management, etc
but currently i cant see the items excepting dashboard, monitoring!! i dont know where the others items gone,
so any one have solution for this issue, also i will attached a image for the current missed GUI interface.
Regards.
Solved! Go to Solution.
01-19-2021 04:42 AM
Finally i found the Solution,
it was authentication issue
so i disabled the authentication by command (No IP HTTP Authentication)
then it was full features on the GUI including the configurations, administrations, and troubleshooting.
Thank for all
10-06-2020 07:46 AM
- Try clearing browser cache and or have test with another , but supported , browser.
M.
10-06-2020 11:58 PM
thank u MR i tried to clear cache, tried another browser, another PC and i still have the same problem.
thanks a lot.
10-10-2020 11:06 AM
Have any changes been made on the switch recently? Any config change or upgrade of code?
12-08-2020 02:53 AM
no not yet
01-19-2021 04:42 AM
Finally i found the Solution,
it was authentication issue
so i disabled the authentication by command (No IP HTTP Authentication)
then it was full features on the GUI including the configurations, administrations, and troubleshooting.
Thank for all
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide