Re: monitor cpu on cisco cbs 220 switch

ayashour · ‎07-03-2023

hi when i add custom cpu sensor for the switch i got no object found

i did try adding OID Value : 1.3.6.1.4.1.9.6.1.101.1.7.0 (worked in cbs350)

and also 1.3.6.1.4.1.9.9.109.1.1.1.1.5.1 (worked on c2960x)

but they did not work

what is the OID Value for the switch CBS220

Mark Elsen · ‎07-03-2023

- Could be due to lack of functionality versus the higher model (cbs350) ; check if the OID is available in
https://software.cisco.com/download/home/286327420/type/283965836/release/2.0.2.8

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

ayashour · ‎07-03-2023

i think the functionality is fine because i can find the cpu utilization in the gui interface

Mark Elsen · ‎07-03-2023

- That does not mean it is available as such in the MIBS , check the
content of the link I posted.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Joseph W. Doherty · ‎07-03-2023

Ditto.