Monitoring ASA Hardware health using SNMP MIB

[giridar]

Hi All,,

I am using Manage Engine OpManager to monitor the ASA's status, i managed to add the device successfully using SNMPv3 

however it needs the correct MIB and OIDs to monitor the status of the pow supply and other hardware components

could you please advise on which MIB to use

thanks in advance

[marce1000]

 - Below you will find some info-resources on the matter, as I pointed out in one of the threads - low end models may not implement all MIB - features. Hardware status monitoring is probably limited too :

    https://community.cisco.com/t5/security-documents/asa-5510-power-supply-status-via-snmp/ta-p/3160793

    https://community.cisco.com/t5/network-management/asa5545-x-power-supply-monitoring-with-snmp/td-p/3786102

   https://community.cisco.com/t5/network-security/asa-5512-monitor-power-supply-status-via-snmp-oid/td-p/2602908

 M.

[giridar]

thank you I have 5525

[balaji.bandi]

if you do not have corrct MIB or OID download from below URL :

https://snmp.cloudapps.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2

you can look below :

1.3.6.1.2.1.47.1.1.1.1.2.11 = "Chassis Cooling Fan 1" [ASN_OCTET_STR]
1.3.6.1.2.1.47.1.1.1.1.2.12 = "Chassis Cooling Fan 1 Sensor" [ASN_OCTET_STR]
1.3.6.1.2.1.47.1.1.1.1.2.13 = "Chassis Cooling Fan 2" [ASN_OCTET_STR]
1.3.6.1.2.1.47.1.1.1.1.2.14 = "Chassis Cooling Fan 2 Sensor" [ASN_OCTET_STR]
1.3.6.1.2.1.47.1.1.1.1.2.15 = "Chassis Cooling Fan 3" [ASN_OCTET_STR]
1.3.6.1.2.1.47.1.1.1.1.2.16 = "Chassis Cooling Fan 3 Sensor" [ASN_OCTET_STR]
1.3.6.1.2.1.47.1.1.1.1.2.17 = "Power Supply 0" [ASN_OCTET_STR]
1.3.6.1.2.1.47.1.1.1.1.2.18 = "Power supply 0 Presence Sensor" [ASN_OCTET_STR]
1.3.6.1.2.1.47.1.1.1.1.2.19 = "Power Supply 0 Input Sensor" [ASN_OCTET_STR]