Solved: Re: Moving port from trunk to access vlan

StephanieTatum62394 · ‎04-19-2021

I have a port that is currently connected to multiple vlans and configured as tagged and trunk. I need to move it to one vlan, access, untagged. When I go to the "Port to vlan membership" screen and select untagged and remove all but one vlan, it says "the interface should be untagged in one vlan" and won't let me save.

StephanieTatum62394 · ‎04-20-2021

I was trying to remove all the other vlans, and leave the 10T vlan while selecting the untagged radio button and hitting save. Embarrassingly, T stands for tagged, and it says that right there on the screen. So what I needed to do was to remove the 10T vlan as well and the add it back while the untagged radio button was selected. This brings it over at 10UT and it works.

View solution in original post

balaji.bandi · ‎04-19-2021

what is this device model , post the screenshot to understand better.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

StephanieTatum62394 · ‎04-19-2021

StephanieTatum62394 · ‎04-19-2021

It's an SG500x-48

StephanieTatum62394 · ‎04-19-2021

I figured this out.

marce1000 · ‎04-19-2021

- If you figured it out and post in the forum, it is always useful to let us now how, then we can learn too...

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

StephanieTatum62394 · ‎04-20-2021

I was trying to remove all the other vlans, and leave the 10T vlan while selecting the untagged radio button and hitting save. Embarrassingly, T stands for tagged, and it says that right there on the screen. So what I needed to do was to remove the 10T vlan as well and the add it back while the untagged radio button was selected. This brings it over at 10UT and it works.