Multiple defined devices for automated action in Syslog Analysis

[w.kuhn]

In RME>Syslog Analysis>Define Automated Action>Add>Advanced>Device Names field you can add multiple devices (according to the help file). This only seems to work when you use a wild card * but if one uses a 'space' or ; or , to separate individual device names the notification does not go through.

Working on LMS2.2

Any Ideas how to add multiple device names and how to separate them?

Thanks

Will

[joseamado.alonso]

this is an example of what I have and it works for me. I separate the IPs with a coma only, no spaces.

172.16.101.101,172.16.102.102,172.16.32.32,172.16.32.33,172.16.64.64,172.16.64.67