Network Management

I completed SNMP community, telnet (login/passwd) and enable via CS, devices credentials. (I did this without error (i did it several times, to be sure))When i check the credential in RME with "device Credential Verification", read and Write Communi...

I would like to backup all my IOS from my LAN via Software Repository.For device which has image*.bin on the root of flash:, it is ok.But for image*.bin which is in a folder flash:/c3550-i5q3l2-tar.121-13.EA1a, for example on 3550, it failed.By using...

I have a new stack of Cisco 2950g-48 using WS-G5483= 100base-T gbic to stack the switches. I've upgraded all switches to IOS 12.1(22)EA4 and assigned ip addresses and enabled CDP on all switches. When using CNA to view the topology of the 4 switches,...

Can someone help with this. My clients are connected to Fa0/1 while my connection to the internet is on Fa0/0. I do not have any access-lists aplied but I cant ping any client address on Fa0/1 from any address on Fa0/0. From the router, I can ping ad...

Hi all, I'd like to manage the QoS features of a Cat3750 (IOS: c3750-i5-mz.122-25.SE.bin). The QoS features as well as the QoS-related "show" commands work fine but unfortunately, I do not manage to access QoS information trough the CISCO-CLASS-BASED...

Greetings All,I have configured a few of our Cisco2651 routers for CW2000,but the problem is that once discovered they are shown as CiscoProducts.471 not as normal routers I have tried searching on the Internet to find what’s causing it but no luck a...

Hi allI am trying to set up Syslog Analyzer in RME 4.0, but I do not seem to be able to get the Syslog Collector to 'Subscribe' properlyI have configured a device to log Syslogs to the CiscoWorks serverWhen I view Syslog Collector Status through: Too...

I don't remember exactly where Discovery Metrics is at in the GUI for Campus Manager but it seems like it's Setup > Diagnostics > Discovery Metrics or something like that. I'm not too sure about the first level but I know Diagnostics > Discovery Me...

When running a report of startup/running config diffs, a report showing the device name, startup, diff and running appears. However, when saving this to a csv file, the diffs aren't saved. Are the diffs stored in a file somewhere or can they be see...

Hi,I want to learn that, is there anyone using Concord eHealth&LiveHealth with CiscoWorks or HPoV (entegrated)?thanks

Having real problems with the DFM install under LMS2.5. Have reached Step 15c of 'Performing a new installation' documentation that comes with CD. Have managed to unregister the daemons with the daemon manager no problems but when trying to re-regist...

Hi,I upgrade my NAM to 3.4 patch 1 (relased 9-JUN).But it looks like it doesn't solve CSCeh55924...I follow the instrution provided on bug notes, but still the same result.I'm sure that I forget some thing... any suggestions?.ThanksJuan.

I am using CM 4.0. If I check both SNMP v3 and SNMP v2 does that attempt to use 2 and then 3 with the devices it polls, one or the other, or one version?For example: 3/4 of my devices use SNMP v2c and another 1/4 uses SNMP v3.

I am trying to find out if the IOS upgrades are for all equipment? Are there certain IOS for certain equipment or can I just download the latest 14.0 and put it on all of my equipment?

Hi AllI am unable to find a reliable MIB that holds values for SCR for VBR / VBR-nrt on 8510.I scanned ATM-traffic MIB in vain.The purpose is to get PVC utilisation (Delta/SCR). Any thoughts or pointers ?Sam