12-08-2011 08:00 AM
Hi ,
my LMS 3.2 won't detect my new Switchs 29xx , router 39XX and my 7200 router !!!!
Thanks
Solved! Go to Solution.
12-08-2011 08:35 AM
First thing you would want to do is upgrade to the latest device package for Common Services (MDF). That can be done under CS > Software Center > Device Update, check CiscoWorks Common Services and Check For Updates.
You can also use CLI commands (my preference) for this:
PSUCli.bat -p cmf -d -dst c:\psu_download -all (will download common services packages to c:\psu_download\cmf)
PSUCli.bat -p cmf -install -src c:\psu_download\cmf -all (will install the packages)
Use the supported device table below to confirm if your devices are or aren't supported:
www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html
12-08-2011 08:35 AM
First thing you would want to do is upgrade to the latest device package for Common Services (MDF). That can be done under CS > Software Center > Device Update, check CiscoWorks Common Services and Check For Updates.
You can also use CLI commands (my preference) for this:
PSUCli.bat -p cmf -d -dst c:\psu_download -all (will download common services packages to c:\psu_download\cmf)
PSUCli.bat -p cmf -install -src c:\psu_download\cmf -all (will install the packages)
Use the supported device table below to confirm if your devices are or aren't supported:
www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html
12-08-2011 08:44 AM
Hi Monge ,
thank you for your reply , is what my server must connected to Internet for download the Update or i can download and install manually ?
Thank you again
12-08-2011 08:48 AM
You can manually download the MDF package for CiscoWorks Common Services. Look for Common Services device packages here:
http://www.cisco.com/cisco/software/find.html?q=ciscoworks&task=default
Once you have the package, you can copy into C:\psu_download\cmf and install with this command from DOS:
PSUCli.bat -p cmf -install -src c:\psu_download\cmf -all
12-08-2011 08:58 AM
OK thank you ,
i will test and send you the result
Thank you so much
PS : is what I downloaded the latest version of CS (CiscoWorks Common Services Software 3.3) ???
12-08-2011 10:37 AM
Please refer to this document for a guide to the various CiscoWorks versions and components that comprise them.
In general, the short answer is no. And even when you have the latest common services for CiscoWorks LMS 3.2, you would still need to download and install device packages.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide