Solved: Need to filter unwanted Alarm on Cisco Prime version 3.10

Dharmender Kumar · ‎07-25-2023

i am receiving a ton of Alarms from WLC to my cisco prime infrastructure.

i want to filter Bluetooth interference alarms at cisco prime infrastructure level but i am not able to create alarm policy i tried in prime version 3.10

is anyone have any idea?

Thanks

Georg Pauwen · ‎07-25-2023

Hello,

I guess the best option would be not to have these Bluetooth interference alarms coming from the WLC at all. Check if you can disable these alarms by configuring the 'CleanAir' settings on your WLC (see link below):

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration-guide/b_cg75/b_cg75_chapter_010000100.html

View solution in original post

marce1000 · ‎07-25-2023

- If you don't want to be bothered by those particular alarms change the severity level of them to informational (e.g.)

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Georg Pauwen · ‎07-25-2023

Hello,

I guess the best option would be not to have these Bluetooth interference alarms coming from the WLC at all. Check if you can disable these alarms by configuring the 'CleanAir' settings on your WLC (see link below):

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration-guide/b_cg75/b_cg75_chapter_010000100.html