netflow on nexus 5 k

[ddesai]

We have following model of nexus 5 k and I could not enable feature for netflow.

Is nexus 5k C5596UP model does not support netflow ?

is there any other way can we configure NetFlow ?

show module
Mod Ports Module-Type Model Status
--- ----- ----------------------------------- ---------------------- -----------
1 48 O2 48X10GE/Modular Supervisor N5K-C5596UP-SUP active *
2 0 O2 GEM with L3 ASIC N55-M160L3 ok

Mod Sw Hw World-Wide-Name(s) (WWN)
--- -------------- ------ ---------------------------------------------------
1 7.3(0)N1(1) 1.1 20:01:00:2a:6a:52:e5:80 to 20:18:00:2a:6a:52:e5:80
2 7.3(0)N1(1) 1.0 --

[balaji.bandi · Accepted solution]

not that i am aware that support - not have switch to test, since we moved to 9K ( 5K are end of life or sooner).

[M02@rt37 · Accepted solution]

Hello @ddesai 

Cisco 5000 series switches can be divided into two series i.e. Cisco Nexus 5600 series and Cisco Nexus 5500 series. Being part of the Cisco Nexus 5000 family, both the series provide the above-listed benefits. However, each and every switch from Cisco Nexus 5600 series and Cisco Nexus 5500 series have some unique features and quite different architecture. 

Nexus 5000 does not support NetFlow.

Cisco Nexus 5600 series release 7.x, yes. 

[MHM Cisco World · Accepted solution]

Check this link

https://community.cisco.com/t5/security-knowledge-base/netflow-support-matrix/ta-p/3644638

I think you need sup. But before do anything contact cisco.

MhM

[ddesai · Accepted solution]

Appreciated to everyone for quick responses.