Nexus 9000 high cpu/memory syslog

[Veroniks23]

Hi everyone! 
are you familiar if there is a syslog about high cpu/memory utilization on a Cisco nexus 9000?

if there is - how does it looks?

I want to use it on my syslog server and I can’t find any info about that 

thank you 

[MHM Cisco World]

share output of this command 

NSK# show system internal processes cpu  5

[Veroniks23]

thank you but that’s not what I meant. 
I wanted to know if there’s a high cpu/memory

on my nexus - if a syslog message about that will show up and how does it looks

[MHM Cisco World]

we can not see wind but we see it effect, 
so we can not see CPU/Memory Utilize BUT we can see 
1-STP flapping 
2-routing flapping 
3-netwrok drop
4-slow SSH/Telnet response 
......
all indicate that there is issue with CPU/Memory and here there are many commend we must enter to see
CPU utilize 
CPU history 
top 5 process utilize CPU

and do necessary step to stop first cause of high utilize.

[darin.marais]

hello, can you tell me how to kill or stop the "top" process that has started by this command?

[marce1000 · Accepted solution]

         - It will not throw specific messages concerning high CPU , for troubleshooting take a look here : https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/troubleshooting/guide/b_Cisco_Nexus_9000_Series_NX-OS_Troubleshooting_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Troubleshooting_Guide_7x_chapter_010001.html#reference_8EB0CA5ED...

 M.

[Veroniks23]

Thank you!! 
Is this the same for ISR 4431 routers?

[marce1000]

         - FYI : https://www.cisco.com/c/en/us/support/docs/routers/10000-series-routers/15095-highcpu.html

 M.