06-11-2020 03:10 AM
Hi all
Is it possible to syslog the output of 'show ip ospf event-history rib'?
switch# sh ip ospf event-history rib OSPF RIB events for Process "ospf-1" 2020 Jun 11 09:22:15.033976 ospf 1 [9643]: : Done sending routes to URIB 2020 Jun 11 09:22:15.033973 ospf 1 [9643]: : Examined 1 OSPF routes 2020 Jun 11 09:22:15.033902 ospf 1 [9643]: : Route (mbest) does not have any next-hop 2020 Jun 11 09:22:15.033900 ospf 1 [9643]: : Processing route 10.1.1.0/24 (mbest) 2020 Jun 11 09:22:15.033896 ospf 1 [9643]: : Done processing next-hops for 10.1.1.0/24 2020 Jun 11 09:22:15.033891 ospf 1 [9643]: : Route 10.1.1.0/24 next-hop 10.1.1.2 deleted from RIB 2020 Jun 11 09:22:15.033869 ospf 1 [9643]: : Processing route 10.1.1.0/24 (ubest)
I have tried all the logging levels but I dont see any of the above messages in show logging or syslog.
switch(config)# logging level ospf ? <0-7> 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
Wondering if its possible to log the event-hist rib to syslog .. if so .. what should be the correct config.
Any guidance much appreciated. Thank you
Solved! Go to Solution.
06-16-2020 06:26 AM
Confirmed with tac - its not possible to log the output of show ip os event-hist rib to logging or syslog
06-11-2020 04:45 AM
Looking for same .. a question for DC forum may be?
06-11-2020 10:15 PM
I think event-hist rib cannot be logged to logging.
Might have to raise a tac case to confirm this ...
06-11-2020 12:43 PM
Hi,
06-11-2020 10:13 PM
Hi
Thanks.
That doesn't show how to log the output to logging or Syslog.
06-16-2020 06:26 AM
Confirmed with tac - its not possible to log the output of show ip os event-hist rib to logging or syslog
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide