02-26-2015 08:52 AM
Hello Guys,
Why it is showing as unsynchronized? Could you please recommend me any free NTP server? Thx.
I have also tried with :
0.ch.pool.ntp.org
VOICE_1#show ntp associations
address ref clock st when poll reach delay offset disp
192.168.0.2 192.168.0.1 2 44 64 1 5.423 1046323 7937.5
~134.170.185.211 10.20.229.51 2 35 64 1 173.43 52356.2 7945.3
192.168.0.252 192.168.0.1 2 19 64 1 1.157 1046324 7937.7
192.168.0.253 192.168.0.1 2 7 64 1 1.849 1046319 7937.8
192.168.0.254 192.168.0.1 2 25 64 1 2.910 1046322 7937.6
* sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured
VOICE_1#show ntp status
Clock is unsynchronized, stratum 16, no reference clock
nominal freq is 250.0000 Hz, actual freq is 249.9933 Hz, precision is 2**24
reference time is D899CF76.87BD1EC1 (17:59:34.530 GTM+1 Thu Feb 26 2015)
clock offset is 0.0000 msec, root delay is 0.00 msec
root dispersion is 4.47 msec, peer dispersion is 0.00 msec
loopfilter state is 'CTRL' (Normal Controlled Loop), drift is 0.000026765 s/s
system poll interval is 64, last update was -739 sec ago.
VOICE_1#sh run | s ntp
ntp server time.windows.com
02-26-2015 01:56 PM
VOICE_1#sh run | s ntp ntp server time.windows.com
Never use a Windows device as an NTP source. Microsoft's implementation of NTP is not of the IEEE standard.
If you want an outside NTP source, make sure your firewall allows you to. Worldwide NTP pools can be found HERE.
02-27-2015 03:38 PM
thx, but the problem was: I did not wait long enough :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide