08-16-2008 02:06 AM
Hi Guys
I have configuered my devices with the following ntp command
ntp server 10.20.20.21 source GigabitEthernet0/0
but when I check following
sh ntp status
Clock is unsynchronized, stratum 16, no reference clock
nominal freq is 250.0000 Hz, actual freq is 250.0000 Hz, precision is 2**18
reference time is 00000000.00000000 (04:00:00.000 AEU Mon Jan 1 1900)
clock offset is 0.0000 msec, root delay is 0.00 msec
root dispersion is 0.00 msec, peer dispersion is 0.00 msec
show ntp association
address ref clock st when poll reach delay offset disp
~10.20.20.21 0.0.0.0 16 7 64 0 0.0 0.00 16000.
* master (synced), # master (unsynced), + selected, - candidate, ~ configured
when I run the debug its like this
*Aug 16 09:59:33.918: NTP: xmit packet to 10.20.20.21:
*Aug 16 09:59:33.918: leap 3, mode 3, version 3, stratum 0, ppoll 64
*Aug 16 09:59:33.918: rtdel 0000 (0.000), rtdsp 10001 (1000.015), refid 00000000 (0.0.0.0)
*Aug 16 09:59:33.918: ref 00000000.00000000 (04:00:00.000 AEU Mon Jan 1 1900)
*Aug 16 09:59:33.918: org CC512323.E51CB984 (13:57:55.894 AEU Sat Aug 16 2008)
*Aug 16 09:59:33.918: rec CC512345.EB95ECC8 (13:58:29.920 AEU Sat Aug 16 2008)
*Aug 16 09:59:33.918: xmt CC512385.EB28F81D (13:59:33.918 AEU Sat Aug 16 2008)
*Aug 16 09:59:33.918: NTP: rcv packet from 10.20.20.21 to 192.168.50.1 on GigabitEthesh ntp associations
*Aug 16 09:59:33.918: leap 3, mode 4, version 3, stratum 0, ppoll 64
*Aug 16 09:59:33.918: rtdel 0000 (0.000), rtdsp 06DC (26.794), refid 494E4954 (73.78.73.84)
*Aug 16 09:59:33.918: ref 00000000.00000000 (04:00:00.000 AEU Mon Jan 1 1900)
*Aug 16 09:59:33.918: org CC512385.EB28F81D (13:59:33.918 AEU Sat Aug 16 2008)
*Aug 16 09:59:33.918: rec CC512363.E5383F23 (13:58:59.895 AEU Sat Aug 16 2008)
*Aug 16 09:59:33.918: xmt CC512363.E53AA23A (13:58:59.895 AEU Sat Aug 16 2008)
*Aug 16 09:59:33.918: inp CC512385.EB854926 (13:59:33.920 AEU Sat Aug 16 2008)
the local clock detail is
sh clock detail
*14:02:04.318 AEU Sat Aug 16 2008
Time source is NTP
Am I missing some thing why my devices are not synchronizing with NTP time, as I need it badly for my MARS Server.
Regards/Asfar
08-16-2008 02:36 PM
Asfar has posted this same question in the LAN Switching and Routing forum where there is active discussion ongoing. I suggest that any discussion be consolidated in the LAN forum.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide