ATTENTION: We are currently working an issue with posting. Thank you for your patience while we work on a resolution.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
605
Views
0
Helpful
1
Replies

NTP is not synchronizing

asfar.zaidi
Level 1
Level 1

Hi Guys

I have configuered my devices with the following ntp command

ntp server 10.20.20.21 source GigabitEthernet0/0

but when I check following

sh ntp status

Clock is unsynchronized, stratum 16, no reference clock

nominal freq is 250.0000 Hz, actual freq is 250.0000 Hz, precision is 2**18

reference time is 00000000.00000000 (04:00:00.000 AEU Mon Jan 1 1900)

clock offset is 0.0000 msec, root delay is 0.00 msec

root dispersion is 0.00 msec, peer dispersion is 0.00 msec

show ntp association

address ref clock st when poll reach delay offset disp

~10.20.20.21 0.0.0.0 16 7 64 0 0.0 0.00 16000.

* master (synced), # master (unsynced), + selected, - candidate, ~ configured

when I run the debug its like this

*Aug 16 09:59:33.918: NTP: xmit packet to 10.20.20.21:

*Aug 16 09:59:33.918: leap 3, mode 3, version 3, stratum 0, ppoll 64

*Aug 16 09:59:33.918: rtdel 0000 (0.000), rtdsp 10001 (1000.015), refid 00000000 (0.0.0.0)

*Aug 16 09:59:33.918: ref 00000000.00000000 (04:00:00.000 AEU Mon Jan 1 1900)

*Aug 16 09:59:33.918: org CC512323.E51CB984 (13:57:55.894 AEU Sat Aug 16 2008)

*Aug 16 09:59:33.918: rec CC512345.EB95ECC8 (13:58:29.920 AEU Sat Aug 16 2008)

*Aug 16 09:59:33.918: xmt CC512385.EB28F81D (13:59:33.918 AEU Sat Aug 16 2008)

*Aug 16 09:59:33.918: NTP: rcv packet from 10.20.20.21 to 192.168.50.1 on GigabitEthesh ntp associations

*Aug 16 09:59:33.918: leap 3, mode 4, version 3, stratum 0, ppoll 64

*Aug 16 09:59:33.918: rtdel 0000 (0.000), rtdsp 06DC (26.794), refid 494E4954 (73.78.73.84)

*Aug 16 09:59:33.918: ref 00000000.00000000 (04:00:00.000 AEU Mon Jan 1 1900)

*Aug 16 09:59:33.918: org CC512385.EB28F81D (13:59:33.918 AEU Sat Aug 16 2008)

*Aug 16 09:59:33.918: rec CC512363.E5383F23 (13:58:59.895 AEU Sat Aug 16 2008)

*Aug 16 09:59:33.918: xmt CC512363.E53AA23A (13:58:59.895 AEU Sat Aug 16 2008)

*Aug 16 09:59:33.918: inp CC512385.EB854926 (13:59:33.920 AEU Sat Aug 16 2008)

the local clock detail is

sh clock detail

*14:02:04.318 AEU Sat Aug 16 2008

Time source is NTP

Am I missing some thing why my devices are not synchronizing with NTP time, as I need it badly for my MARS Server.

Regards/Asfar

1 Reply 1

Richard Burts
Hall of Fame
Hall of Fame

Asfar has posted this same question in the LAN Switching and Routing forum where there is active discussion ongoing. I suggest that any discussion be consolidated in the LAN forum.

HTH

Rick

HTH

Rick

Review Cisco Networking for a $25 gift card