ā12-21-2023 07:02 PM
Hi everyone, I have a problem with 2 of the PC in my network. Upon restart it's getting 192.168.0.x /24 on the DHP. It should be 172.16.79.x /24. Although it works when I do ip config release and renew, its annoying doing it everyday.
Ports is already on the correct VLAN. I have no problem with DHCP server since other PC is getting the correct IP within their VLAN.
When I try to open 192.168.0.1 his default gateway. It loads 192.168.0.1/xamp and has a login popup.
Can anyone help me figure this out. Thanks.
ā12-21-2023 09:21 PM
you can try a few things, move the pc to working port and see if problem persists, update latest software/drive firmware on the PC, increase lease time.
ā12-21-2023 10:04 PM
can you share the DHCP pool and VLAN SVI
MHM
ā12-22-2023 12:03 AM
@bryg0d check your network devices. seems like you have another DHCP server in your network. that may be small router/switch/server or any new device connected to your network. trace the device 192.168.0.1. i guess this can be new ADSL/internet router connected to your network
ā12-22-2023 12:07 AM
We hear all the problem mentioned.
But we don't have information how is your network what devices involved here, all in one switch ? or one router ? where is your DHCP
post the configuration relevant information for us to understand - rather we guess and provide different steps - that never end process.
what kind of troubleshooting you done on the switch ?
is this issue only with 1 devices ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide