10-24-2008 08:38 AM
How can I retrieve PoE info from a Cisco switch using SNMP?
10-24-2008 06:12 PM
What type of switch running what version of code?
10-27-2008 03:08 PM
Take a look at this MIB
CiscoPoePdMIB
OID:1.3.6.1.4.1.9.9.414
This should explain more
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-POE-PD-MIB
10-28-2008 07:53 AM
To answer the first question, the software version is IOS 12.2(25) SEE2. Switch model is 3560.
As for the CISCO-POE-PD-MIB, I've tried walking that tree and I get nothing back from the switch. SNMP is enabled on the switch and I'm getting info back from queries, just not from 1.3.6.1.4.1.9.9.414.
10-28-2008 08:23 AM
There is no PoE SNMP support in the image you are running. If you upgrade to 12.2(35)SE, you will have support for the POWER-ETHERNET-MIB and the CISCO-POWER-ETHERNET-EXT-MIB.
10-28-2008 08:29 AM
Thanks!
03-23-2009 08:22 AM
The origin of this question is that I have a client who is currently using Cisco Network Assistant to look at statistics for PoE Utilization. I'm wondering why he can see PoE Utilization via Cisco Network Assistant but I cannot see anything using SNMP on OIDs in POWER-ETHERNET-MIB and CISCO-POWER-ETHERNET-EXT-MIB. Does Cisco Network Assistant use something other than SNMP to glean this information?
03-23-2009 09:27 AM
Cisco Network Assistant does not use SNMP. It simply executes CLI commands on the device, and parses those.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: