11-14-2017 09:33 AM - edited 03-01-2019 06:15 PM
Hello All,
Switch: WS-C2960X-24PS-L
IOS: 15.2(2)E5
I configured this switch with one Port-channel (*Po1) and it has Gi1/0/23 and Gi1/0/24 as its members.
Both Gi ports are configured with switchport mode trunk, and so is the Port-channel.
I was wondering who's configuration takes precedence, the "Port-channel" or the "GigabitEthernet" members of the Port-channel? I wanted to add the "switchport trunk allowed vlan ..." command, but I wasn't sure if I need to add it to all 3 of the "Interface" configs, or if it only needs to be added to the Port-channel configuration?
Thanks in Advance,
Matt
Solved! Go to Solution.
11-16-2017 09:34 AM
Port channel has the precedence so you must add to the port channel. Dont forget the "add" command to avoid downtime.
-If I helped you somehow, please, rate it as useful.-
11-16-2017 09:34 AM
Port channel has the precedence so you must add to the port channel. Dont forget the "add" command to avoid downtime.
-If I helped you somehow, please, rate it as useful.-
11-16-2017 02:52 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide