05-29-2020 06:41 AM
Please advise on the following for my Prime Infrastucture on a VM:
VM Hardware Compatibility
Upgrade Available
On VM: ESXi5.1 and later (version 9)
On Host: ESXi 6.7 and later (Version 14)
Upgrade to match Host
Can this upgrade be done with out causing interference with the nodes in production?
Thanks
Solved! Go to Solution.
06-02-2020 08:53 PM
It may work but you would be better to upgrade. Depending on how you are using your Prime, it may be easier to just export your devices and import into a fresh installation of 3.8 running on ESXi 6.7. You can backup and restore but that's a lot more complicated and takes much longer.
The officially supported ESXi versions for Prime Infrastructure 3.2 are 5.5 and 6.0.
Prime Infrastructure 3.6 and above (the current release is 3.8) support ESXi 6.7:
05-30-2020 07:27 AM
Your question is very unclear.
What is your current version? Do you want to upgrade and migrate to a new ESXi server?
06-01-2020 06:09 AM
On VM: ESXi 5.1
On Host: ESXi 6.7
So can we upgrade the VM to 6.7 without uninstalling Prime Infrastructure, ISE-PAN, ISE-MandT, and ISE-PSA1 and 2?
That is the question that I am referring to in both of my community posts.
Thanks
David
06-01-2020 07:20 AM
What is your Prime Infrastructure version?
06-01-2020 07:24 AM
Version 3.2
06-01-2020 07:24 AM
06-02-2020 08:53 PM
It may work but you would be better to upgrade. Depending on how you are using your Prime, it may be easier to just export your devices and import into a fresh installation of 3.8 running on ESXi 6.7. You can backup and restore but that's a lot more complicated and takes much longer.
The officially supported ESXi versions for Prime Infrastructure 3.2 are 5.5 and 6.0.
Prime Infrastructure 3.6 and above (the current release is 3.8) support ESXi 6.7:
06-03-2020 05:18 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide