cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
931
Views
0
Helpful
6
Replies

Problem with EssentialsDM

mladenp
Level 1
Level 1

Hello,

I (my customer) have similar problem like described in this discussion:

https://supportforums.cisco.com/message/669826#669826

EssentialsDM is stuck in "waiting to initalise" state. Problem started to occurring around a last thursday.

EssentialsDM.log, EssentialsDM_Server.log and pdshow attached.

Regards,

Mladen

1 Accepted Solution

Accepted Solutions

It appears you have the Windows remote management service started which listens on tcp/47001.  This port is required by EssentialsDM.  Can you disable Windows RM, and see if that helps?

View solution in original post

6 Replies 6

Joe Clarke
Cisco Employee
Cisco Employee

Do you have QPM installed on this server?

No, we haven't.

Shutdown Daemon Manager, then port the output of the command "netstat -a -n -o -b".

Hello,

here is output.

It appears you have the Windows remote management service started which listens on tcp/47001.  This port is required by EssentialsDM.  Can you disable Windows RM, and see if that helps?

Yes, it helps. Everything is OK again.

Thank you very much,

Mladen