cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
532
Views
5
Helpful
3
Replies
Highlighted
Beginner

Problems verifying image on flash

CCOB-4F-2960X#dir
Directory of flash:/

*SNIP*
6 -rwx 16800768 Apr 25 2019 10:04:25 -04:00 c2960s-universalk9-mz.152-2.E9.bin

 

122185728 bytes total (83666944 bytes free)
CCOB-4F-2960X#verify flash:c2960s-universalk9-mz.152-2.E9.bin
File system hash verification failed for file flash:/c2960s-universalk9-mz.152-2.E9.bin(No such file or directory).

 

WTF??

 

And yes, I've tried flash:/, flash1:/, flash2:/ etc...tried every combination but it won't work. I've never had any problems verifying an image before, so I don't understand.

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Collaborator

Re: Problems verifying image on flash

@josephjmg hello,

try in bold exemple below;

122185728 bytes total (83666944 bytes free)
CCOB-4F-2960X#verify /md5 flash:c2960s-universalk9-mz.152-2.E9.bin
File system hash verification failed for file flash:/c2960s-universalk9-mz.152-2.E9.bin(No such file or directory).

 

WTF??

 

And yes, I've tried flash:/, flash1:/, flash2:/ etc...tried every combination but it won't work. I've never had any problems verifying an image before, so I don't understand.

 
 
If you dont need input /md5, run commands below and try again without /md5
 
SW# configure terminal

SW(CONFIG)# file verify auto

 

Check it for more information: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sys-image-mgmt/configuration/15-s/sysimgmgmt-15-s-book/sysimgmgmt-md5.html

Jaderson Pessoa
*** Rate All Helpful Responses ***

View solution in original post

3 REPLIES 3
Highlighted
VIP Collaborator

Re: Problems verifying image on flash

@josephjmg hello,

try in bold exemple below;

122185728 bytes total (83666944 bytes free)
CCOB-4F-2960X#verify /md5 flash:c2960s-universalk9-mz.152-2.E9.bin
File system hash verification failed for file flash:/c2960s-universalk9-mz.152-2.E9.bin(No such file or directory).

 

WTF??

 

And yes, I've tried flash:/, flash1:/, flash2:/ etc...tried every combination but it won't work. I've never had any problems verifying an image before, so I don't understand.

 
 
If you dont need input /md5, run commands below and try again without /md5
 
SW# configure terminal

SW(CONFIG)# file verify auto

 

Check it for more information: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sys-image-mgmt/configuration/15-s/sysimgmgmt-15-s-book/sysimgmgmt-md5.html

Jaderson Pessoa
*** Rate All Helpful Responses ***

View solution in original post

Highlighted
Beginner

Re: Problems verifying image on flash

The /md5 part worked, sorry to have wasted your time with such a simple thing. Thank you for your help!

Highlighted
VIP Collaborator

Re: Problems verifying image on flash

you're welcome


Regards
Jaderson Pessoa
*** Rate All Helpful Responses ***
CreatePlease to create content
Content for Community-Ad