Hi All,
Any advise for SNMPv3 to push the configuration, due to seems look like only SNMPv2 can I found.
SNMPv3
| snmpset -v 3 -u USERNAME -l authPriv -a SHA -A AUTH_PASSWORD -x AES -X PRIV_PASSWORD DEVICE_IP_ADDRESS 1.3.6.1.4.1.9.9.96.1.1.1.1.2.XXX i 1 |
| snmpset -v 3 -u USERNAME -l authPriv -a SHA -A AUTH_PASSWORD -x AES -X PRIV_PASSWORD DEVICE_IP_ADDRESS 1.3.6.1.4.1.9.9.96.1.1.1.1.3.XXX i 4 |
| snmpset -v 3 -u USERNAME -l authPriv -a SHA -A AUTH_PASSWORD -x AES -X PRIV_PASSWORD DEVICE_IP_ADDRESS 1.3.6.1.4.1.9.9.96.1.1.1.1.4.XXX i 1 |
| snmpset -v 3 -u USERNAME -l authPriv -a SHA -A AUTH_PASSWORD -x AES -X PRIV_PASSWORD DEVICE_IP_ADDRESS 1.3.6.1.4.1.9.9.96.1.1.1.1.5.XXX a TFTP_IP_ADDRESS |
| snmpset -v 3 -u USERNAME -l authPriv -a SHA -A AUTH_PASSWORD -x AES -X PRIV_PASSWORD DEVICE_IP_ADDRESS 1.3.6.1.4.1.9.9.96.1.1.1.1.6.XXX s config.txt |
| snmpset -v 3 -u USERNAME -l authPriv -a SHA -A AUTH_PASSWORD -x AES -X PRIV_PASSWORD DEVICE_IP_ADDRESS 1.3.6.1.4.1.9.9.96.1.1.1.1.14.XXX i 1 |
SNMPv2
snmpset -c [snmp-community-string] -v 2c [ip-device] 1.3.6.1.4.1.9.9.96.1.1.1.1.2.336 i 1
snmpset -c [snmp-community-string] -v 2c [ip-device] 1.3.6.1.4.1.9.9.96.1.1.1.1.3.336 i 4
snmpset -c [snmp-community-string] -v 2c [ip-device] 1.3.6.1.4.1.9.9.96.1.1.1.1.4.336 i 1
snmpset -c [snmp-community-string] -v 2c [ip-device] 1.3.6.1.4.1.9.9.96.1.1.1.1.5.336 a [ip-tftp-server]
snmpset -c [snmp-community-string] -v 2c [ip-device] 1.3.6.1.4.1.9.9.96.1.1.1.1.6.336 s [file-name]
snmpset -c [snmp-community-string] -v 2c [ip-device] 1.3.6.1.4.1.9.9.96.1.1.1.1.14.336 i 1
Thanks.
