cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
241
Views
0
Helpful
9
Replies
Highlighted
Beginner

Renew CSR 1000v license

Hi

 

I have a CSR in cloud with ax_2500M license that expires in a couple of days, we got new license i.e. ax_1G and installed the same on the router and even reloaded the router however the one to expire shows "In use" while the new one is "not in use".  What do we need to do to make the new one installed "In use".  Below for your ref:-

 

CSR01#sh license det
Index: 1 Feature: ax_1G Version: 1.0
License Type: Permanent
Start Date: N/A, End Date: May 15 2021
License State: Active, Not in Use
Lock type: Node locked
Vendor info: <UDI><PID>CSR1000V</PID><SN>XXXX</SN></UDI><T></T>
License Addition: Exclusive
License Generation version: 0x8200000
License Count: Non-Counted
License Priority: Medium
Store Index: 1
Store Name: Primary License Storage

 

Index: 2 Feature: ax_2500M Version: 1.0
License Type: Permanent
Start Date: N/A, End Date: May 24 2020
License State: Active, In Use
Lock type: Node locked
Vendor info: <UDI><PID>CSR1000V</PID><SN>XXXX</SN></UDI><T></T>
License Addition: Exclusive
License Generation version: 0x8200000
License Count: Non-Counted
License Priority: Medium
Store Index: 0
Store Name: Primary License Storage

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Re: Renew CSR 1000v license

The license expired today and router was smart enough to automatically make the new one "In Use".  

View solution in original post

9 REPLIES 9
Highlighted
VIP Mentor

Re: Renew CSR 1000v license

Highlighted
Beginner

Re: Renew CSR 1000v license

It;s not a smart license, the method mentioned in the provided link applies to smart licensing...Please confirm for traditional licensing.

Highlighted
VIP Mentor

Re: Renew CSR 1000v license

have you looked the document which have information using PAK file.

BB
*** Rate All Helpful Responses ***
Highlighted
Beginner

Re: Renew CSR 1000v license

yes, it only talks about license installation which is done and the license is even showing up when "show license detail" is issued, the problem is the new license shows "not in use", output provided in original query.  

Highlighted
VIP Mentor

Re: Renew CSR 1000v license

appoligies i have misread your subject and content was different.

 

can you post :

 

show run | include license

show run | in platform

BB
*** Rate All Helpful Responses ***
Highlighted
Beginner

Re: Renew CSR 1000v license

come up with some consutructive answers please, this is unnecessarily dragging it.

Highlighted
VIP Mentor

Re: Renew CSR 1000v license

Until we see some of your  input as part of understansd the issue - we need your inputs  - since we are unable able to read what is configured other than one single show license command.

 

can you post :

show run | include license

show run | in platform

 

If you are exiting 255MB License and you upgraded to 1GB, you need to use the 

below syntax to use 1GB

 

platform hardware throughput level MB throughput

 

 

BB
*** Rate All Helpful Responses ***
Highlighted
Beginner

Re: Renew CSR 1000v license

The license expired today and router was smart enough to automatically make the new one "In Use".  

View solution in original post

Highlighted
VIP Mentor

Re: Renew CSR 1000v license

Glad to know - make sure platform in right throughput which your purchased ?

 

BB
*** Rate All Helpful Responses ***
CreatePlease to create content
Content for Community-Ad