Hi, I have a problem with RME 4.2 from CWLMS 3.1. I have configured SSH in my asa 5520 device but RME can't get the configuration file.
I ran a job to sync archive but i get this message error:
*** Device Details for ASA_5520_VOZ_01 *** Protocol ==> Unknown / Not Applicable Selected Protocols with order ==> Telnet,TFTP,SSH Execution Result: CM0062 Polling ASA_5520_VOZ_01 for changes to configuration. CM00 Polling not supported on PRIMARY STARTUP config, defaulting to fetch. CM00 Polling not supported on PRIMARY RUNNING config, defaulting to fetch.
STARTUP CM0151 PRIMARY STARTUP Config fetch failed for ASA_5520_VOZ_01 Cause: TELNET: Failed to establish TELNET connection to 10.225.177.36 - Cause: Connection refused. Failed to get the start tag-: in the configuration. Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required. RUNNING CM0151 PRIMARY RUNNING Config fetch failed for ASA_5520_VOZ_01 Cause: TELNET: Failed to establish TELNET connection to 10.225.177.36 - Cause: Connection refused.
Could not detect SSH protocols running on the device
Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
I only have configured ssh because telnet is not permited.
I am having a similar problem. Looking at the dcmaservice.log the LMS server is trying to connect to a different IP address on the firewall (the outside ip address which is higher than the inside ip address). the LMS server is not using the IP address that was configured when the device was added. Inventory and credentials checking works fine. How can I change it so that the RME module uses the configured IP address not one it selects based on some definition I cannot find?
Firewall rules are blocking accessing the ASA via the IP address that RME picked.
After my first publication of the book OSPF Demystified With RFC in 2014 which goes beyond the CCIE level which explores OSPF from the RFC's perspective. Since one year I had the idea : why not write a book for CCIE Enterprise and Infrastructure to be an ...
Do you use Cisco DNA Center? Have you used and are you willing to provide your feedback in using the Cisco DNA Center help and documentation?
If so, we’d like you to complete the survey linked below. Your feedback will help provide more effective and easi...
Listen: https://smarturl.it/CCRS9E18Follow us: https://twitter.com/CiscoChampion Reaching the height of your career is no simple feat. It often requires a combination of pursuing the right education, building the right professional network and being ...