cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1098
Views
0
Helpful
4
Replies

SNMPv3 Not Working

Jess65065
Level 1
Level 1

Hello,

 

Not sure if I am missing anything, but I cannot get snmpv3 to work with OpManager. Below is what I have configured.

No one seems to configure it the same. Some show more complex configs that include engineIDs and remote engineIDs and some show you just need a user and group. 

Those that show the remote Engine IDs gloss over where they are getting the IP they are using. 

 


snmp-server view ALL_ACCESS iso included
snmp-server group SNMPGROUP v3 priv read ALL_ACCESS write ALL_ACCESS
snmp-server user FAKEUSER SNMPGROUP v3 auth sha fakepass priv aes 128 fakepass

4 Replies 4

Mark Elsen
Hall of Fame
Hall of Fame

 

 - You may find this thread informational : https://community.cisco.com/t5/network-management/snmp-v3/td-p/1090226

 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

Thank you but there is no solution there. 

Hello,

 

which device and which IOS version are you trying to configure this with ?

WS-C2960S-48TS-S 15.0(2)SE8