cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1306
Views
0
Helpful
1
Replies
pattyj
Beginner

What is required to get SNMPv3 informs to be sent? Configured but debugs showing nothing sent to NMS host.

Cannot get informs to generate with the config below.  Can snmpv3 poll device just fine.  What concept am I missing here.

 

snmp-server view vfview_default iso included

snmp-server group vfnetwork v3 priv read vfview_default write vfview_default notify vfview_default access 5

snmp-server host 10.1.9.141 informs version 3 priv vfuser  config


User name: vfuser
Engine ID: 80000009030000F82C7B6920
storage-type: nonvolatile        active
Authentication Protocol: MD5
Privacy Protocol: AES128
Group-name: vfnetwork

1 ACCEPTED SOLUTION

Accepted Solutions
pattyj
Beginner

Figured it out. 

Missing command

snmp-server user username groupname remote 1.1.1.1 v3 auth md5 password priv aes 128 password

and

snmp-server source-interface informs Loopback0

View solution in original post

1 REPLY 1
pattyj
Beginner

Figured it out. 

Missing command

snmp-server user username groupname remote 1.1.1.1 v3 auth md5 password priv aes 128 password

and

snmp-server source-interface informs Loopback0

View solution in original post

Content for Community-Ad