11-15-2015 08:49 AM
I'm trying to create an EEM applet to do automatic tftp backu on my Nexus 7706 running 6.2.12, but I'm not seeing the "event timer cron" option under the created event manager applet. Do I need to create a crom policy to get this to work? Here are the options I see under my applet:
(config)# event manager applet BACKUP-CFG-2TFTP
N7K-North(config-applet)# event ?
cli Create a cli event specification
counter Create a counter event
fanabsent Create fanabsent event specification
fanbad Create fanbad event specification
fib FIB related event
module Create a 'module' event specification
module-failure Create a 'module-failure' event specification
neighbor-discovery Show CDP new neighbors
oir Create Online-Insertion-Removal event specification
policy-default Use the event in the system policy being overridden
snmp Create a 'snmp' event specification.
storm-control Create a storm control event specification
syslog Create a syslog event specification
sysmgr System manager related events
tag Event tag identifier
test Create a 'test' event specification
track Create a 'track' event specification
So the real question is how can I get my applet to fire using cron on my Nexus 7706?
Thanks
Solved! Go to Solution.
11-15-2015 11:45 AM
There is no timer event detector in NX-OS 6.x. NX-OS 7.x adds support for this. In the meantime, you can use "feature scheduler" to run scripts at a specific time. Applets cannot be scheduled.
02-27-2016 05:38 PM
At Nexus 5548 with NX-OS 7.x, there is not option "feature scheduler", but there is right option "feature evmed" which is ment in this guide Cisco Nexus 7000 Series NX-OS System Management Configuration Guide:
event timer { cron cronentry string
Note |
To use this command, you must first enable the feature evmed command to enable generic event detectors. |
After you enable this feature at your Nexus, you can use the same configuration EEM applet like in Cisco IOS at switches or routers.
11-15-2015 11:45 AM
There is no timer event detector in NX-OS 6.x. NX-OS 7.x adds support for this. In the meantime, you can use "feature scheduler" to run scripts at a specific time. Applets cannot be scheduled.
11-15-2015 02:42 PM
Thank you!
02-27-2016 05:38 PM
At Nexus 5548 with NX-OS 7.x, there is not option "feature scheduler", but there is right option "feature evmed" which is ment in this guide Cisco Nexus 7000 Series NX-OS System Management Configuration Guide:
event timer { cron cronentry string
Note |
To use this command, you must first enable the feature evmed command to enable generic event detectors. |
After you enable this feature at your Nexus, you can use the same configuration EEM applet like in Cisco IOS at switches or routers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide